Samsung SRP-350PG - SRP 350 B/W Direct Thermal Printer Service Manual

Also see for SRP-350U: Operator's manual Operator's manual Service manual

CommandSamsung Electro-Mechanics 8-3DLE ENQ n[Name][Format][Range][Description]Real-time request to printer.ASCII DLE ENQ nHex 10 05 nDecimal 16 5 n1 ≤n ≤2Recovers from an error and restart printing from the line where the error occurred.ESC FF[Name][Format][Description]Print data in page mode.ASCII ESC FFHex 1B 0CDecimal 27 12In page mode, prints all buffered data in the printing area collectively.ESC SP n[Name][Format][Range][Description]Set right-side character spacing.ASCII ESC SP nHex 1B 20 nDecimal 27 32 n0 ≤n ≤255Sets the character spacing for the right side of the character to[n ×horizontal or vertical motion units].ESC ! n[Name][Format][Range][Description]Select print modes.ASCII ESC ! nHex 1B 21 nDecimal 27 33 n0 ≤n ≤255Selects print mode(s) using n as follows.Bit Off/On Hex Decimal FunctionOff 00 0 Character font(12 ×24) selected.0On 01 1 Character font(9 ×17) selected.1,2 - - - Undefined.Off 00 0 Emphasized mode not selected.3On 08 8 Emphasized mode selected.Off 00 0 Double-height mode not selected.4On 10 16 Double-height mode selected.Off 00 0 Double-width mode not selected.5On 20 32 Double-width mode selected.6 - - - Undefined.Off 00 0 Underline mode not selected.7On 80 128 Underline mode selected.ESC $ nL nH[Name][Format][Range][Description]Set absolute print position.ASCII ESC $ nL nHex 1B 24 nL nDecimal 27 36 nL n0 ≤n ≤2550 ≤n ≤255Set the distance from the beginning of the line to the position at which subsequent characters are to beprinted.* The distance from the beginning of the line to the print position is[(nL + nH ×256) ×(vertical or horizontal notion unit)] inches.