Samsung SMT-i5210 Quick Reference Manual

Also see for SMT-i5210: User guide User guide Quick reference guide Quick reference guide Quick reference guide

SMT-i5210 Quick Reference GuideVersion 1.2 May 2015SCM Default Feature CodesWhile the most frequently used features appear as dedicated buttons on your phone, there are ahost of additional features that can be used by dialing the default codes listed in the table below.Some feature codes require an extension, group number or orbit number. When using thesecodes, replace the letter X with the appropriate digits. For example; to pick up a ringing call atextension 2205, us the Direct Call Pickup code *0X# where X is 2205. User dials *02205#Feature Code Feature CodeAll Feature Clear *99# Call Park Extension *11#Auto Answer Mode - Cancel *430# Call Park Orbit *10X#Auto Answer Mode - Set *431# Conference *89#Auto Retry of Busy Number - Cancel *170# Conference on Answer *81X#Auto Retry of Busy Number - Set *171# Direct Call Pickup *0X#Barge-In with Tone *23X# DND - Cancel *400#Barge-In without Tone *24X# DND - Set *401#Callback - Cancel *160# DND Override *25#Callback - Set *161# Group Call Pickup **#Call Forward All - Cancel *610# Group Call Forward - Cancel *680X#Call Forward All - Set *611X# Group Call Forward - Set *681X#Call Forward Busy - Cancel *620# In/Out of Hunt Group - In *531X#Call Forward Busy - Set *621X# In/Out of Hunt Group - Out *530#Call Forward Busy/No Answer - Cancel *640# Station Paging *55#Call Forward Busy/No Answer - Set *641X# Voice Mail Access *88#Call Forward No Answer - Cancel *630# Voice Mail Memo ##Call Forward No Answer - Set *631X# Voice Mail Transfer *87#Call Forward Clear All *60#Note: The system administrator may have set your system up so users do not need todial the #. If so you can ignore the # in the code.Condition Phone Status IndicatorBusy Steady REDRinging Flashing REDVoiceMessage Flashing GREENSMT-i5210 IP Phone Quick Reference GuideFor more information on your phone settings and features see the SMT-i5210 User GuideName FunctionPhone status indicator Shows the phone’s statusSoft button Selects function from the LCD soft menusConference button Makes a conference callTransfer button Transfer callsHold button Holds a call temporarily without hanging upUC dial L> Call Forward C>idle position R >DNDNavigation Ring &OK ButtonMove Left/Right/Up/Down in the displayPress center OK button to make a selection14 Programmable buttons Can assign various features with LED indicationDial button Enters numbers and charactersSpeaker button Toggles the Speaker on or offHeadset button Toggles the Headset on or offVolume button Set Volume for Ringing, Handset, SpeakerMute button Toggles the microphone on or offService button Displays the UC service menusMessage button Displays the message menuPhonebook button Displays phone book listsLCD screen Shows call info, menus and status iconsHandset Use for private conservationsSCM Samsung Communication ManagerSCM Default Feature Codes

/ 2

Related manuals for Samsung SMT-i5210