© SAMSUNG Telecommunications America 01/20071SMT-W5100E HandsetQuick Set-Up GuideRegistering SMT-W5100E Handsets (work with SMT-R2000 AP only)1. Handset Registrationa. Need to un-register first, if handsets have previous registration datai. Press 0000), <4>, <0000>, to un-registerb. Enter the following info to register the handset:i. Press ii. Select <8> for Systemiii. Enter password <0000>iv. Select <1> for Registrationv. Press to select <1. System 1>vi. Select <1> for DHCP mode and continue on x. or,vii. Select <2> for Static IP modeviii. Enter handset IP address and press i. e.g. 192.168.1.101 (use “*” for “.”)Note: DO NOT ENTER LEADING 0 FOR IP ADDRESS. EX. Enter 192.168.1.101not 192.168.097.101.ix. Enter System IP address, e.g. 192.168.1.5, and press x. Enter System Gateway, e.g. 192.168.1.1, and press xi. Enter System Netmask, e.g. 255.255.255.0, and press xii. Enter System SSID, e.g. 80211g, and press i. Press and hold key for numeric digitxiii. Enter user ID, e.g. 1212, and press ; all handsets have the same defaultID & PW.i. It is recommended to change the ID to match the handset extension. Itwill be easier for maintenance purpose. For example, change user ID to3301 for extension 3301. User ID must be 4 digits.ii. Use MMC 846 to change the user ID.xiv. Enter password, e.g. 0000, and press .
