Samsung SERIES 6 6900 User Manual

Also see for OfficeServ 7000 Series: System administration guide User guide User instruction User guide User guide

17English03 Basic FeaturesScreen Fit: Displays the full image without any cut-offwhen HDMI (720p / 1080i / 1080p) or Component(1080i / 1080p) signals are inputted.✎ NOTEx When Double (À, Œ) mode has been set in PIP(Picture-in-Picture), the Picture Size cannot be set.x After selecting Zoom1, Zoom2 or Wide Fit:1. Press the ► button to select Position.2. Press the ENTERE button.3. Press the ▲ or ▼ button to move the picture upor down.4. Press the ENTERE button.5. Press the ► button to select Reset.6. Press the ENTERE button to reset the pictureto its default position.x After selecting Screen Fit in HDMI (1080i/1080p) orComponent (1080i/1080p) mode, you may need tocenter the picture:1. Press the ◄ or ► button to select Position.2. Press the ENTERE button.3. Press the ▲, ▼, ◄ or ► button to move thepicture.4. Press the ENTERE button.5. Press the ◄ or ► button to select Reset.6. Press the ENTERE button.x HD (High Definition): 16:9 - 1080i/1080p (1920x1080),720p (1280x720)x Settings can be adjusted and stored for eachexternal device you have connected to an input onthe TV.Input Source Picture SizeATV, AV,Component (480i, 480p)16:9, Zoom1,Zoom2, 4:3DTV(1080i),Component (1080i, 1080p),HDMI (720p, 1080i, 1080p)16:9, 4:3, Wide Fit,Screen FitPC 16:9, 4:3■ Digital Noise Filter (Off / Low / Medium / High / Auto/ Auto Visualization): If the broadcast signal receivedby your TV is weak, you can activate the Digital NoiseFilter feature to reduce any static and ghosting that mayappear on the screen.✎ When the signal is weak, try other options until thebest picture is displayed.Auto Visualization: When changing analog channels,displays signal strength.✎ Only available for analog channels.✎ When bar is green, is that the best possible signal.■ MPEG Noise Filter (Off / Low / Medium / High /Auto): Reduces MPEG noise to provide improvedpicture quality.■ HDMI Black Level (Normal / Low): Selects the blacklevel on the screen to adjust the screen depth.✎ Available only in HDMI mode.■ Film Mode (Off / Auto1 / Auto2): Sets the TV toautomatically sense and process film signals from allsources and adjusts the picture for optimum quality.✎ Available in TV, AV, COMPONENT (480i / 1080i)and HDMI (480i / 1080i).■ Auto Motion Plus (Off / Clear / Standard / Smooth /Custom / Demo): Removes drag from fast scenes witha lot of movement to provide a clearer picture.✎ The info screen on your TV displays the resolutionand frequency of the incoming video signal (60Hz). This displayed frequency is not what theTV is displaying by using the Auto Motion Plusfunction.✎ If noise occurs on the screen, please set theAuto Motion Plus to Off. If Auto Motion Plus isCustom, you can set the Blur Reduction, JudderReduction or Reset manually.✎ If Auto Motion Plus is Demo, you can comparethe difference between on and off modes.Blur Reduction: Adjusts the blur reduction level fromvideo sources.Judder Reduction: Adjusts the judder reduction levelfrom video sources when playing films.Reset: Reset the custom settings.■ Auto Protection Time (2 hours / 4 hours / 8 hours/ 10 hours / Off): Set the time the screen remains idlewith a still image until the screen saver is activated. Thescreen saver prevents the formation of ghost images onthe screen.■ Smart LED (Off / Low / Standard / High / Demo):Controls LED backlight to maximize picture clarity.Demo: Displays the difference between Smart LED onand off modes.Picture Reset (OK / Cancel)Resets your current picture mode to its default settings.¦ Setting up the TV with Your PCSet the input source to PC.O MENUm → Picture → ENTEREAuto Adjustment tAdjust frequency values/positions and fine tune the settingsautomatically.✎ Not available when connecting with an HDMI/DVI cable.