OneStart

Menu
Samsung SDN-520N Instruction Manual Manual pdf 19 page image

Samsung SDN-520N Instruction Manual

Page 1 previewPage 2 previewPage 3 previewPage 4 previewPage 5 previewPage 6 previewPage 7 previewPage 8 previewPage 9 previewPage 10 previewPage 11 previewPage 12 previewPage 13 previewPage 14 previewPage 15 previewPage 16 previewPage 17 previewPage 18 previewPage 19 previewPage 20 previewPage 21 previewPage 22 preview
Contents
  1. Cautions
  2. Table Of Contents
  3. Front
  4. Bottom
  5. Back
  6. connecting to power
  7. 6 COLOR CCD CAMERA
  8. lens selection
  9. gain control
  10. Connection
  11. Backlight
Samsung SDN-520N Instruction Manual Manual pdf 19 page image
Synchronization ModeTwo synchronization modes are available Internal andExternal linelock. -In linelock mode, it synchronizes the videosignal between cameras without a synchronous generator.The linelock synchronization is only used in the areas of60Hz(NTSC Models)/50Hz(PAL Models).1. Press the SET button to display the setup menu and move the arrowindicator to 'Sync.' using the UP or DOWN button.2. Select 'LL' or 'INT' using the LEFT or RIGHT button.INT : Internal synchronization.LL : External linelock synchronization.Color ( Day & Night)Your camera provides automatic mode changeover by sensing dayor night conditions. It changes to Color mode in day conditions foroptimal color and to BW mode in night conditions for clearidentification.1. Press the SET button to display the setup menu and move the arrowindicator to 'Color' using the UP or DOWN button.2. Select a mode using the LEFT or RIGHT button.ON : Color mode is kept up.OFF : A black and white mode is kept up.Auto1 : Select this mode under a normal light source(sunlight orfluorescent lamp). When changing between color andB/W, the OSD key does not act for 3 seconds.Auto2 : Select this mode under light source that have a wavelengthrange mostly above 800nm(incandescent lamp). Whenchanging between color and B/W, the OSD key does notact for 3 seconds.3. L.L mode Press the SET button.3. Press the SET button.SetupCamera ID OFFBacklight OFFMotion Detect. OFFLens DCShutter ESCGain AGCWhite Balance ATWColor Auto1Sync. LLResetEndSetupCamera ID OFFBacklight OFFMotion Detect. OFFLens DCShutter ESCGain AGCWhite Balance ATWColor Auto1Sync. LLIf you set low level in Video IRIS mode, Color/BW may not change overautomatically.Under Gain OFF Color/BW does not change over automatically, ON/OFF isonly available.If you change ‘Gain’ menu from ON to OFF, ‘Color’ mode change to ON.If you change ‘Gain’ menu from OFF to ON, ‘Color’ mode change to Auto1.Select Auto2 in ‘Color’ mode under incandescent lamp.Adjust the focus if the camera is out of focus for changing modes.NOTENotes36 37COLOR CCD CAMERA COLOR CCD CAMERASSEETTUUPP MMEENNUU SSEETTUUPP MMEENNUU
/ 22
Related manuals for Samsung SDN-510N
Samsung SCZ-2273 User Manual first page preview
Samsung SCZ-2273 User Manual
This manual is suitable for:
SDN-510NSDN-510PSDN-520NSDN-520P
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved