Samsung SCX-8230NA Installation Manual

Also see for CLX-9252 Series: User guide Service manual

Setting up the hardware_ 51.Setting up the hardwareWe recommend you leave to setting up the hardware to the installation engineer from Samsung orthe dealership where you bought the machine.This chapter gives you step-by-step instructions for setting up the hardware. We recommend youset up the hardware following the order in this chapter.This chapter includes:• Installation environment• Machine configuration• Optional goods by models• Installation flow of the hardware• Unpacking and placing the hardware• Installing the cabinet stand, optional dual cassette feeder or optional high capacity feeder• Removing the scanner locking screw• Putting the rubber packings• Installing the toner cartridges• Installing the imaging units• Installing other options• Loading paper• Connecting a printer cable• Turning the machine onBe sure to go through the following before setting up the hardware:• If you are installing the machine after moving it from a cold to warm location, leave the machine unpacked for atleast two hours so that the machine is fully adapted to the site temperature, avoiding image faults caused bycondensation (The term “condensation” refers to the formation of droplets of water on the surface of a metalobject brought from cold to warm place, i.e., as the result of the rapid cooling of the moisture (vapor) around theobject).• Installation engineer must prepare the screw drivers and diagonal-cutting pliers.