Printing problems2236. TroubleshootingThe machine does notprint.The machine may be configured incorrectly. Check the Printing Preferences to ensure that all of the print settings are correct.The printer driver may be incorrectly installed. Uninstall and reinstall the machine’s driver.The machine is malfunctioning. Check the display message on the control panel to see if the machine is indicating asystem error. Contact a service representative.The document size is so big that the hard diskspace of the computer is insufficient to access theprint job.Get more hard disk space and print the document again.The output tray is full. Once the paper is removed from the output tray, the machine resumes printing.The machine selects printmaterials from the wrongpaper source.The paper option that was selected in thePrinting Preferences may be incorrect.For many software applications, the paper source selection is found under the Paper tabwithin the Printing Preferences (see "Opening printing preferences" on page 54).Select the correct paper source. See the printer driver help screen (see "Using help" onpage 55).A print job is extremelyslow.The job may be very complex. Reduce the complexity of the page or try adjusting the print quality settings.Half the page is blank. The page orientation setting may be incorrect. Change the page orientation in your application (see "Opening printing preferences" onpage 54). See the printer driver help screen (see "Using help" on page 55).The paper size and the paper size settings do notmatch.Ensure that the paper size in the printer driver settings matches the paper in the tray.Or, ensure that the paper size in the printer driver settings matches the paper selectionin the software application settings you use (see "Opening printing preferences" onpage 54).The machine prints, butthe text is wrong,garbled, or incomplete.The machine cable is loose or defective. Disconnect the machine cable and reconnect. Try a print job that you have alreadyprinted successfully. If possible, attach the cable and the machine to another computerthat you know works and try a print job. Finally, try a new machine cable.Condition Possible cause Suggested solutions
