2727ENGNoteIn case of B/W mode, it may fail to focus when B/W mode isconverted to Color mode.That is because it must have the condition to have IRIS opened forthe maximum before adjusting the Back-Focus.The smaller the F number of lens is, the lower the focus depth offield is (e.g. Using a high speed electronic shutter may lower thedepth of the camera).It is required to set the focus under the condition that IRIS is openfor the maximum in color mode.DAY...If you press the Setup switch when the DAY… submenu is selected,the corresponding screen appears. You can set the values forC-GAIN, AGC COLOUR, AGC DETAIL, and C-KNEE in Day mode.Colour images are implemented by these settings.NoteWhen the value of AGC DETAIL becomes large, it also makes thenoise stand out.(DAY)C-GAIN (7) � � � � � � IAGC COLOR ( 0) � � � � I � � � �AGC DETAIL (7) I � � � � � � �C-KNEE (5) � � � � � I � �RET