Samsung SCB-5003 User Manual

Also see for Beyond SCB-5003: Specifications

Contents

English_31● CAmeRA OpeRATIONSENSITIVITY : Set the sensitivity to tampering detection.ALARM OUT : Outputting of detection signals can be set.EXTERNAL : Send signals through external terminals.OSD : Display signals on the screen.RETURN : Return to the TAMPERING menu.RETURN : Return to the VIDEO ANALYTICS menu.In the following cases, the initially set tampering detection function can malfunction.- In a monitoring environment with a simple background or an environment with low light level or atnight, the detection performance can deteriorate.- Sudden changes in the lighting and severe camera shaking can be wrongly detected as tampering.- Immediately after tampering, the camera tampering detection can take up to a max of five seconds.- If camera tampering is detected, after some time(five sec), stabilization will be done beforerestarting. During stabilization, there is no detection.MOTION : This productgenerates signalseach time an objectmovement is detectedin the four areas ofthe screen so efficientmonitoring can beachieved.DET. SIZE : Selects an objectsize to detect onthe screen.DET. AREA : Set the areas ofmotion detection.SEL AREA : Select from fourareas that userswant.MODE : Determine whether touse the selected area.SENSITIVITY : Set the sensitivity of the motion detection. When you adjustthe higher level, the more sensitive.TOP/BOTTOM/LEFT/RIGHT : Area location can be adjusted.RETURN : Return to the MOTION DET menu.M -MOTION DET▶ 1. DET. SIZE2. DET. AREA3. NON DET. AREA4. INDICATOR OFF5. ALARM OUT6. RETURNMOTION DETECT AREA▶ 1. SEL AREA AREA12. MODE ON3. SENSITIVITY -------- 54. TOP -------- 15. BOTTOM -------- 1006. LEFT -------- 17. RIGHT -------- 1008. RETURN