yy● SETUPMAIN SETUP䯝2.EXPOSURE8.SPECIAL9.EXIT SAVEChange the statususing the FunctionSetup switch.Select the function usingthe Function Setup switch.4.5.6.7.1.LENS DCDAY/NIGHT AUTOSSNR3 ONBACKLIGHT OFF3.WHITE BAL ATWDEFOGSelect a desired function using the Function Setup switch.Place the cursor over a desired item.Set up a selected item by using the Function Setup switch.To finish the setting, select ‘EXIT’ and press the Function Setup switch.An item with the icon also has sub menus. To select a sub menu, select an item with the iconand press the Function Setup switch.An item with the - - - icon is unavailable due to function settings.2.y3.4.English_19LENSUsing this function, you can choose lens type.1.Select the connected lens type by using the Function Setup switch.2.When the SETUP menu screen is displayed, select ‘LENS’ by using the FunctionSetup switch so that the arrow indicates ‘LENS’.DC : Select Auto Iris Lens.Manual : Select Manual Lens.- RETURN (SETUP menu.DC, MANUAL) : Select this to save the menu settings and return the MAIN- Brightness (DC, Manual) : Adjusts the videobrightness.- FOCUS ADJ (DC) : To adjust the DC lens focuscorrectly, you must activate theFocus ADJ mode under each lensmenu. To setting the Focus ADJmode on, and according to yourneed to adjust the shutter mode.(MANUAL, A.FLK)10IIIIIIIII*IIIIIIII▶DC LENS▶BRIGHTNESSFOCUS ADJRETURNFOCUS ADJSHUTTERRETURNMANUALOFF