ENGLISHNotices and Safety Instructions21. LIGHTNING:For added protection of this CAMCORDER during a lightningstorm or when it is left unattended and unused for long periods oftime, unplug it from the wall outlet and disconnect the antenna orcable system.This will prevent damage to the CAMCORDER due to lightningand power-line surges.22. POWER LINES:An outside antenna system should not be located in the vicinityof overhead power lines or other electric light or power circuitswhere it can fall into such power lines or circuits. When installingan outside antenna system, extreme care should be taken tokeep from touching such power lines or circuits as contact withthem might be fatal.23. OVERLOADING:Do not overload wall outlets and extension cords as this canresult in a risk of fire or electric shock.24. OBJECTS AND LIQUIDS:Never push objects of any kind into this CAMCORDER throughopenings as they may touch dangerous voltage points or shortout a part that could result in a fire or electric shock.Never spill liquids of any kind onto the CAMCORDER. Shouldspillage occur, unplug unit and have it checked by a technicianbefore use.25. SERVICING:Do not attempt to service this CAMCORDER yourself. Openingor removing covers may expose you to dangerous voltage orother hazards.Refer all servicing to qualified service personnel.26. DAMAGE REQUIRING SERVICE:Unplug this CAMCORDER from the wall outlet and refer servicingto qualified service personnel under the following conditions:a. When the power-supply cord or plug is damaged.b. If any liquid has been spilled onto, or objects have fallen intothe CAMCORDER.c. If the CAMCORDER has been exposed to rain or water.d. If the CAMCORDER does not operate normally by followingthe operating instructions, adjust only those controls that arecovered by the operating instructions. Improper adjustment ofother controls may result in damage and will often requireextensive work by a qualified technician to restore theCAMCORDER to its normal operation.e. If the CAMCORDER has been dropped or the cabinet hasbeen damaged.f. When the CAMCORDER exhibits a distinct change inperformance, this indicates a need for service.27. REPLACEMENT PARTS:When replacement parts are required, be sure the servicetechnician has used replacement parts specified by themanufacturer and having the same characteristics as the originalpart.Unauthorized substitutions may result in fire, electric shock orother hazards.28. SAFETY CHECK:Upon completion of any service or repairs to this CAMCORDER,ask the service technician to perform safety checks to determinethat the CAMCORDER is in safe operating order.
