ENGLISH118118✤✤Maintenance :Cleaning and Maintaining the CAMCleaning the Body✤ To Clean the Exterior of the CAM To clean the exterior, use a soft dry cloth. Wipe the bodygently.Do not apply excessive force when cleaning, gently rub thesurface. The LCD monitor surface should not be pressed. Use a softdry cloth to clean the surface. To clean the lens, use an optional air blower to blow out dirtand other small objects. Do not wipe the lens with cloth oryour fingers. If necessary, use lens cleaning paper. Do not use thinner, alcohol or benzene for cleaning.Otherwise, the finish may be damaged. Cleaning should be done only after the battery pack has beenremoved, and other power sources have been disconnected.The CAM incorporates a rechargeable lithium cell that maintains thedate and other settings even when the AC adaptor and the batteryare removed. The rechargeable lithium cell is automatically rechargedwhen the CAM is used.Charging the Built-in Rechargeable Battery✤ If The CAM is not used at all, the cell runs down in 5 days. In thiscase, connect the AC adaptor to the CAM and turn on the powerswitch. Then leave it for 24 hours.After that, set the date and other settings again.Using the Built-in Rechargeable Battery