Samsung SC-M102 Owner's Instruction Book

Also see for SC-M102: Owner's manual User manual Owner's instruction book Owner's instruction book Owner's instruction book

ENGLISHMiscellaneous Information: Printing Photos115115ENGLISHMiscellaneous Information: Connecting the CAM with other Devices114114Connecting the CAM to a PC using the USB cableYou can connect the CAM to a PC that supports USB connections.Use the provided USB cable for connection to a PC.1. Insert the cradle into the CAM.2. Connect the provided USB cable to USB port ofthe cradle.3. Move [Mode Selector] down to turn on the CAMand move it down again. The Mode Selection screen appears.4. Connect the other side of the USB cable to theUSB port of your PC. If your Operating System is Windows XP,a Removable Disk pop-up dialog will appear.After completing the data transfer, you must disconnect the cable in the following way.1. Select the removable disk icon and click the right mouse button to select ‘Safely Remove Hardware’.2. Select ‘Stop’ and disconnect the USB cable when the pop-up screen disappears.Disconnecting USB ConnectionNotes✤ If you disconnect the USB cable from the PC or the CAM during the data transfer,the data transfer will stop and the data may be damaged.✤ If you connect the USB cable to a PC using a USB HUB or with other device at the same time,it might cause conflict and may not work properly. If this occurs, remove all other devices and try the connection again.With the Pictbridge Support, you can control the printer directly throughthe CAM in order to print out stored pictures.For direct printing of your stored pictures using the PictBridge function,you must connect the CAM to a PictBridge printer using a USB cable.1. Connect the CAM to the PC with the USB cable.2. Move [Mode Selector] down to turn on the CAM. USB menu screen appears automatically.3. Move the [ / ] switch to select and press the [OK] button.4. Move the [ / ] switch to select and press the [OK] button.5. Move the [ / ] switch to select desired number and press the [OK] button. You can select the number of copy from 0 to 99.6. Move the [ / ] switch to select and press the [OK] button.BackUSB ModePC-CamPictBridgeMassStoragePrintNextPreviousDate OnCopies 5PictBridge 100-0056PrintNextPreviousDate OnCopies 1PictBridge 100-0056Printing with Pictbridge FunctionNotes✤ If you select in the menu, the previous menu appears.✤ If you want to select the next or previous photo, select or using [ / ] switch.✤ For further details about printing photos, refer to the User’s manual of the printer.