Samsung SC-140 User Manual

Also see for SC-140: User guide Service manual

Contents

5Installing the SoftwareYou can install the device driver for DOS or for Windows¡ Do not install DOS Driver when the program of Windows 95 is going on.(Remark CD-ROM Driver in the state of Config. Sys.)1 Turn on your computer and wait for it to boot.2 Insert the driver disk into a floppy disk drive(usually the A drive).3 If you are a...DOS userWindows userWindows 95userThen :u Type a: at the DOS promptu Press the RETURN keyu Access the File Manageru Click on the A icon.u Type CDSETUP after the a: promptu Press RETURNDouble-click CDSETUP.EXE from the WindowsFile Manageru When you are in Windows 95, it is notu necessary to install Device Driver.u Whereas, when you are in Dos Mode ofu Windows 95, then install as follows.u Click on MY COMPUTER icon.u Click on the A icon.456Run the CDSETUP program:To...Confirm the installation YExit without installing NWhen the Setup Completed screen is displayed, remove theinstallation floppy disk from the drive.7 Reboot your system.If you answer Y(Yes), the installation program automaticallyu Creates a SAMSUNG directory on your hard disku Copies the required softwares (mscdex.exe and sscdrom.sys)u Modifies the CONFIG.SYS and AUTOEXEC.BAT filesResult :u The computer restartsu Both the device driver and MSCDEX are loadedResult :Then enter...If you are a... Then :DOS userWindows user

/ 8

Related manuals for Samsung SC-140