Samsung SBP-4442 KIT User Manual

Contents

user manual

SAMSUNG CAMERASBP-4442 KITUser ManualYou can charge theSBP-4442 easily.Before using this KITPrior to using this KIT, please read the user manual thoroughly.Keep the manual in a safe place.24-pin)cket.4442.Checking the SBP-4442 charging status1. Press the Power button to turn on the SBP-4442 and you can check the charging status.2. Press the Power button lightly and the charging status will be displayed.3. Press the Power button for over 2 seconds and the SBP-4442 will be turned off.- Insert the supplied DC cable for charging the SBP-4442 into the DC output terminal.Turn on the SBP-4442 and you can use the SBP-4442 as a reserved battery for camera,mobile phone, etc.- You can use the SBP-4442 with a device that has 24-pin port.How to use the SBP-44422 KITharged, charging LED will be off or orangenection again.ly, green LED of the AC adapter will be on.n.Using the SBP-4442Do not charge and use the battery with a device at the same time. The device may notbe used because of the low battery capacity.When you charge a device with the SBP-4442, the charging time may vary dependingon the device type.INFORMATION6806-33007Power button Discharging ChargingUsing with a digital camera andmobile phoneUsing and Charging the SBP-4442at the same timeThank you for buying an SBP-4442.This manual will guide you through using the SBP-4442.Please read this manual carefully before using the SBP-4442.ENGLISHIf there is low batterycapacity duringusing a SamsungDigital camera, you can use theSBP-4442 for the reservedbattery.If there is low batterycapacity during usingportable devices, like amobile phone, you can usethe SBP-4442 for the reservedbattery.Keep this manual in a place where you can use it easily.SBP-4442 can be used for the following.An FCC warningThis device has been tested in accordance with the limits of a class B digital deviceunder item 15 of the FCC rules. These limits are designed to provide protectionagainst harmful interference in commercial installation. This equipment generates,absorbs and can emit radio frequency energy. If it is not installed and used inaccordance with the instructions, it may cause harmful interference to radiocommunication.There is however, no guarantee that interference will not occur in some situations.Should any interference occur when this device is in operation, please try one ormore of the following measures.Change the location and direction of any aerial.Increase distance between the camera and the affected device.Use a different socket away from the affected device.Please contact a Samsung agent or a radio/TV engineer.This device complies with part 15 of the FCC Rules.Changes or modifications not expressly approved by the party responsible forcompliance could void user's authority to operate the equipment.

/ 2

Related manuals for Samsung SBP-4442 KIT