64Setup and Reset66 Setup and Reset6.4 PC/AV ModeSet PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie. This function does not support Analog mode. Supplied for the wide models only such as 16:9 or 16:10. If the monitor (when set to HDMI) is in power saving mode or is displaying the messageCheck Signal Cable, press the MENU button to display the On Screen Display(OSD).You can select PC or AV. The functions available on the monitor may vary depending on the model. Refer to the actualproduct.6.4.1 Configuring PC/AV Mode1 When the Function Key Guide appears, select [ ] by moving the JOG button UP.Next, press the JOG button.2 Move to SETUP&RESET controlling the JOG button UP/DOWN and press the JOG button.3 Move to PC/AV Mode controlling the JOG button UP/DOWN and press the JOG button.4 Move to the HDMI controlling the JOG button UP/DOWN and press the JOG button.The following screen will appear.5 Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.6 The selected option will be applied.SETUP&RESETOffAccelerationAutoStand-byReset AllEco Saving PlusOff TimerPC/AV ModeKey Repeat TimeSource DetectionPower LED OnSet to AV to enlargethe picture.PC/AV ModeHDMI PCAVSelect the PC/AV modefor the HDMI source.