Setting Up _1111101101 sEtting uPREAttACHing tHE REFRigERAtoR DooRsAssemble the Refrigerator doors1. Reattach two flat head screws( 1 ) and two hex headscrews( ) to the hinge completely.2. Place the hole in the bottom of the door( )over the lowerhinge ( )Be aware not to miss the hinge cap because it canbe easily taken off.3. Insert the upper hinge shaft( ) into the hole on thecorner of the Refrigerator door( ). Make sure the hingeis level between the upper hinge hole( ) and the hole ofthe cabinet( ) and reattach the hinge screws( ) andground screw( 10 ) by turning in a clockwise direction.Reconnect the wires.4. Place the front edge of the top table( 11 ) on the front of theupper hinge( 1 ) and reattach with three screws.When reattaching the top table, make sure that thewires are not pressed or damaged by the top table.10111
