REMOVING THE FREEZER ACCESSORIES1. Tilting PocketTo remove - Pull the brackets([_) upward until you hear aclicking sound and remove the pocketTo replace - Hook tile ends of the pocket into both brackets((_]) and push down until it locks into place,l oI'o0"om2. Auto Pull out DrawerTo remove - Pull the drawer out to full extensionTilt up rear of drawer and lift straight outTo relocate - Place the drawer onto the rails by tilting it up,Lower the drawer into place until it is horizontaland slide the drawer in,3. Freezer Drawer BinTo remove the drawer - Pull the drawer out fully.Tilt up the rear of the bin and lift itout to removeTo replace the drawer - Piace the bin into the rail assembly.To remove the divider - Pull the divider straight up,To replace the divider - Hook the top corners of divider overthe hole of the bin.Operating 27