Operating _2702 oPeRating1. Tilting PocketTo remove - Pull the brackets( 1 ) upward until you hear aclicking sound and remove the pocketTo replace - Hook the ends of the pocket into both brackets( 1 ) and push down until it locks into place.2. Auto Pull out DrawerTo remove - Pull the drawer out to full extension.Tilt up rear of drawer and lift straight out.To relocate - Place the drawer onto the rails by tilting it up.Lower the drawer into place until it is horizontaland slide the drawer in.3. Freezer Drawer binTo remove the drawer - Pull the drawer out fully.Tilt up the rear of the bin and lift itout to remove.To replace the drawer - Place the bin into the rail assembly.To remove the divider - Pull the divider straight up.To replace the divider - Hook the top corners of divider overthe hole of the bin.REMOvING THE FREEzER ACCESSORIES112DA68-01812H.indb 27 2009.8.10 9:5:4 AM