Safety2.1.2 Technical SpecificationsPV Data (DC)Max. input total power 6.6 kWpMax. input power per string 3.3 kWpMax. input voltage 550 VMin. input voltage/Initial input voltage 125 V/150 VMPPT voltage range 125 V~500 VMax. input current per string 15 AMax. input short circuit current for each MPPT 20 AMax. inverter backfeed current to the array NegligibleNumber of independent MPPT trackers 2Number of DC inputs pairs for each MPPT 2Connection type MC4Battery Data (DC)Battery capacity 3.6 kWhBattery voltage range/nominal voltage 48.0 V~65.9 V/60 VBattery Max. current 46.3 ABattery nominal current 33.3 ADischarge of depth 90% (6000 cycles)Battery technology Li-IonNominal DC/DC power 2.0 kWDC/DC converter technology IsolatedGrid Data (AC)Rated power (at 230V, 50 Hz) 4.6 kWMax. apparent power 5 kVANominal voltage/range 230 V/184 V~264 VRated power frequency/range 50 Hz/47.5 Hz~51.5 HzMax. current 20 AMax. over-current protection 30 AMax. allowed current for fuse protection 32 AInrush current 68.6 A (peak), 100 μsMax. output fault current 420 A (peak), 4 msAdjustable power factor range 0.95~1~0.95Feed-in phases/connection phases 1/1Total Harmonic Distortion.(Total harmonic factor of the output current with totalharmonic factor of the AC voltage < 2%,5%Australia (Eng.) 05/2015. Rev1.1 9