Menu
Samsung QM105D User Manual
                                                                                                                         |
18Reverse Side― The color and shape of parts may differ from what is shown. Specifications aresubject to change without notice to improve quality.DVI IN /MAGICINFO INRGB / DVI /HDMI /AUDIO INRJ45IR /AMBIENTSENSOR INHDMI IN 3HDMI IN 2HDMI IN 1USBDP IN 3(UHD 30Hz)DP IN 2(UHD 60Hz)DP IN 1(UHD 60Hz)RGB INIR OUTAUDIO OUTRS232C OUT RS232C INPort DescriptionIR /AMBIENT SENSOR IN Supplies power to the external sensor board or receives the light sensor signal.HDMI IN 1, HDMI IN 2, HDMI IN 3 Connects to a source device using an HDMI cable or HDMI-DVI cable.DP IN 3 (UHD 30Hz) Connects to a PC using a DP cable.― Obtain sharp picture quality when viewing UHD content at 30 Hz.― The recommended resolution for the DP IN 3 (UHD 30Hz) port is 1920 x1080 @ 60 Hz. The resolution can be changed to the optimal resolution of3840 x 2160 @ 30 Hz, if required.DP IN 2 (UHD 60Hz) Connects to a PC using a DP cable.― Obtain sharp picture quality when viewing UHD content at 60 Hz.DP IN 1 (UHD 60Hz)DVI IN / MAGICINFO IN DVI IN: Connects to a source device using a DVI cable or HDMI-DVI cable.MAGICINFO IN: To use MagicInfo, make sure to connect the DP-DVI cable.RJ45 Connects to MDC using a LAN cable.IR OUT Receives the remote control signal via the external sensor board and outputs thesignal via LOOP OUT.RS232C OUT Connects to MDC using an RS232C adapter.RS232C INUSB Connects to a USB device when upgrading software.RGB IN Connects to a source device using a D-SUB cable.AUDIO OUT Connects to the audio of a source device.RGB / DVI / HDMI / AUDIO IN Receives sound from a PC via an audio cable. |
Related manuals for Samsung QM105D
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved