Samsung QHH Series User Manual

Also see for DB43J: Quick setup guide User manual User manual User manual User manual

114Standby ControlYou can set the screen standby mode to be applied when an input signal is received.• AutoPower-saving mode will activate if no input signals are detected even though a source device is connected tothe display.The message No Signal will appear if no source device is connected.• OffThe message No Signal will appear if no input signals are detected.― If No Signal is displayed although a source device is connected, check the cable connection.― If No Signal Message is set to Off, the No Signal message does not appear.If this is the case, set No Signal Message to On.• OnPower-saving mode will activate if no input signals are detected.Network StandbyThis feature keeps the network power on when the product turns off.• Off / OnPower ButtonThe power button can be set to either turn on the power or turn on/off the power.• Power on only: Set the power button to turn on the power.• Power on and off: Set the power button to turn on/off the power.Power ControlAuto Power OnPC module powerMax. Power SavingStandby ControlNetwork StandbyPower ButtonOffOnOnOffPower on only– The displayed image may differ depending on the model.