Samsung OfficeServ 7000 Series System Administration Manual

Also see for OFFICESERV 500 Series: Service manual Quick setup guide Quick setup guide Quick setup guide System administration & special features guide

312. Dial the station number (e.g., 205) OR [205] NO ANS FWDpress UP or DOWN key to select the 010 SECstation and press the right soft key OR ORpress ANS/RLS to select all stations [ALL] NO ANS FWDand press the right soft key 010 SEC3. Press UP or DOWN key to select the [205] DTMF DUR.station timer and press the right soft key 0100 MS→4. Enter the new value via the dial pad, [205] DTMF DUR.e.g., 0300 and the system will return 0100 MS→0300to step 25. Press TRSF to store and exitprogramming OR press SPK to storeand advance to the next programADDING NAMES TO THETRANSLATION TABLEThis program allows the system administrator or technician to associate a CID orANI number received from the Central Office with a name programmed in thistranslation table. If there is no match between a received number and a name inthis table, [no CID name] or [no ANI name] will be displayed.The translation table consists of 1000 entries in the OfficeServ 500 M andOfficeServ 7100, and OfficeServ 7200 and OfficeServ 7400 systems or 2000entries in the OfficeServ 500 L system or 500 entries in the OfficeServ 100 sys-tem with each entry comprised of a ten digit telephone number and a 16 digitname. See Program Station Names.Open customer programming and follow the instructions below.PROGRAM KEYSUP & DOWN - Used to scroll through options.KEYPAD - Used to enter selections.SOFT KEYS - Move cursor left and right.SPK - Used to store data and advance to next MMC.HOLD - Used to clear previous entry.