Samsung OfficeServ 100 General Description Manual

Also see for OFFICESERV 100 Series: System administration guide System administration & special features guide User guide User guide User instruction

Contents

4-33Pulse to Tone SwitchoverWhen dialling a number on a dial pulse network, a station user can dial # and the system willbegin to send DTMF tones.RedialThere are various external number redial options available to station users. Each type canredial up to a maximum of 18 digits.y AUTO RETRY—When an outside number is dialled and a busy signal is received, theauto retry feature can be used to reserve the outside line and automatically redial thenumber for a programmable number of attempts (available to keyset users only).y LAST NUMBER REDIAL (LNR)—The most recently dialled number on a C.O. line issaved and may be redialled by pressing the Redial key or dialling the LNR access code.y MANUAL RETRY with LNR—When you make an outside call and receive a busy signalyou can press the LNR key to redial the same number again. This operation can bemanually repeated for a limited number of attempts as defined by system programming(available to keyset users only).y MEMO REDIAL—When you are calling directory assistance you can store the numberyou are given using the dial pad and SAVE number feature (available to keyset usersonly).y SAVED NUMBER REDIAL—Any number dialled on a C.O. line may be saved for redial ata later time.Remote HoldA user can place an outside call on system hold on an available CALL or Line key at another(remote) station, rather than their own, using a simple series of key presses.Reset Station FeaturesAn All Clear (ALLCLR) code can be dialled at a station to reset all features set at the stationsuch as station lock, call forward, alarm reminders, station messages and DND.Ring ModesEach keyset user can select one of three distinct ways to receive internal calls. The phonecan automatically answer on the speakerphone, voice announce through the speaker or re-ceive ringing. When the ring mode is selected, keyset users can choose one of eight distinctring tones. Forced Auto Answer is invoked by the calling station and is controlled by the call-ing station’s class of service.Ringing PreferenceLifting the handset or pressing the Speaker key automatically answers a call ringing at thekeyset. Using this method, users are assured of answering the oldest call first. When ringingpreference is turned off, the user must press the flashing key to answer. Users may answerringing lines in any order by pressing the flashing key.