English 6English 7Rear Panel1. 2.0 CH Speaker Connector TerminalsThe speaker connector terminals are located onthe rear of the system.1. To achieve the correct sound quality, insert thespeaker connector cables identified below intothe correct speaker terminals on the back of thesystem.• Left speaker (marked L).• Right speaker (marked R).2. ONLY FOR SERVICE• This jack is for service only. Please do not use.3. AUX IN Terminals1. Use an Audio Cable (not supplied) to connect AUXIN on the product to Audio Out on an external analogcomponent.• Be sure to match connector colors.• If the external analog component has only oneAudio Out jack, connect to either the left orright terminal.• Press the TUNER/AUX button on the mainunit or press the AUX button on the remotecontrol to select the AUX input.• When the unit is in AUX mode, if none of thebuttons are pushed for more than 8 hours, thepower will automatically turn off.4. FM/AM Antenna Connector TerminalPlug the connector on the FM/AM antenna (supplied)into the FM/AM terminal on the rear of the system.1234