Menu
Samsung MM-DX7 Instruction Manual
Also see for MM-DX7: Instruction manualService manualInstruction manual
                                 | |
Contents
|
1413CONNECTIONSPress STOP button.• If playing a disc, press the STOP button twice so that “STOP”, appears on the display.Press and hold P.SCAN button on the remote control for over 5 seconds.• Pressing and holding the button for over 5 seconds will select "Progressive Scan" and "Interlace Scan"alternately.• When you select P.SCAN, "P.SCAN" will appear on the display.• To set P.Scan mode for DivX and MP3 discs, press the P.SCAN button on the remote control for morethan 5 seconds with no disc in the unit (“'NO DISC" on the display), then load the DivX disc and play.In interlaced-scan video, a frame consists of twointerlaced fields (odd and even), where each fieldcontains every other horizontal line in the frame.The odd field of alternating lines is displayed first, andthen the even field is displayed to fill in the alternatinggaps left by the odd field to form a single frame.One frame, displayed every 1/25th of a second, containstwo interfaced fields, thus a total of 50 fields aredisplayed every 1/50th of a second.The interlaced scanning method is intended for capturinga still object.Interlaced Scan (1 FRAME = 2 FIELDS)The progressive scanning method scans one full frame ofvideo consecutively down the screen, line by line.An entire image is drawn at one time, as opposed to theinterlaced scanning process by which a video image isdrawn in a series of passes.The progressive scanning method is desirable for dealingwith moving objects.Progressive Scan (FULL FRAME)What is Progressive (or Non-Interlaced) Scanning?• This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that supportProgressive Video. (It does not work on TVs with conventional component inputs, i.e., non-progressivescan TVs.)• Depending on the capabilities of your TV, this function may not work.Note12Unlike regular Interlace Scan, in which two fields of picture information alternate to create the entirepicture (odd scan lines, then even scan lines), Progressive Scan uses one field of information (all linesdisplayed in one pass) to create a clear and detailed picture without visible scan lines.P.SCAN(Progressive Scan) Function Setting the ClockFor each step, you have a few seconds to set the required options.If you exceed this time, you must start again.• You can display the time, evenwhen you are using anotherfunction, by pressingTIMER/CLOCK once.• CLOCK is displayed.2 Press TIMER/CLOCKtwice.1 Switch the systemon by pressingPOWER button.• "TIMER" appears in the display.• The current time is now set.5 When the correcttime is displayed,press ENTER.• Increase the minutes :• Decrease the minutes :4 When the correcthour is displayed,press ENTER.The minutes flash.• Increase the hours :• Decrease the hours :3 Press ENTER.The hour flashes.NoteChecking the Remaining TimeCHAPTER REMAINTITLE REMAINCHAPTER ELAPSEDTITLE ELAPSEDTRACK REMAINTOTAL ELAPSEDTOTAL REMAINTRACK ELAPSEDEach time the REMAIN button is pressedPress the REMAIN button.• For checking the total and remaining time of a title or chapter being played.DVD CDVCD• By default, the video format is set to "PAL".• "NTSC" and "PAL" will appear in the display.At this time,press the NT/PAL button shortly to select between “NTSC” and “PAL”.• Each country has a different video format standard.• For normal playback, the video format of the disc must be the same as the video format of your TV.Turn off the main unit and then press and hold NT/PAL button on the remote controller for over 5 seconds .Selecting the Video FormatMM-DX7(1p~30p)-NO-6 4/13/07 14:53 Page 16Downloaded From Disc-Player.com Samsung Manuals |
Related manuals for Samsung MM-DX7
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved