Samsung MIM-B16N Installation Manual

Also see for MIM-B16N: Technical data book

Setting the Initial Valueff You can set the initial value for each channel1 Access to main menu by pressing the [Menu] button from the normal display Then select ‘2 Configuration’ by pressingthe [], [] buttons, and press the [Set] buttonMain Menu2.ConfigurationEnter your P/W0:0:0:02 Enter the password the [], [] buttons and then press the [Set] button- The default password is ‘0000’3 Select ‘2 6 Value Set’ by pressing the [], [] buttons and then press the [Set] button2.Configuration2.6 Value Set2.6 Value SetCH1:00000.0kWh4 Move to the channel you want to set by pressing the [], [] buttons, and then press the [Set] button- You can select each channel or all channel altogether5 Modify the digit by pressing the [], [] buttons You can move to next digit by pressing the [Set] button- You can modify the initial value of the channel you wish to change- If you modify the setting, saved value will be reset and the device will re-calculate the value according to the modifiedvalue- To set the initial value for all channels, select ‘ALL Channel’ in step 4Set Ch1 kWhCH1:00000.0kWhSave SettingsCH1:00000.0kWh6 Press the [Set] button to save the setting7 After the setting, press the [Menu] button to move to upper menu or cancel the setting- All menus will return to the normal display if there is no input for 1 minuteEnglish-27INSTAllING ThE PRODUCT02