Samsung MCM-A300N User Manual

Also see for MCM-A300N: Technical data book Installation manual

Contents

12Functions of Touch Centralized ControllerMenu within a zoneYou can create a new page with the beside the page number. However, the page without an indoor unit will beautomatically deleted with saving.Icon Function DescriptionDeleting a pageYou can delete the page which does not have devices.• You cannot delete the page that has devices.CAUTIONMoving a zone You can move a selected device to another zoneMoving a page You can move a selected device to another page.GroupingYou can make a group for the selected devices so that a user can view them as one group. Whenthe devices become a group, the last selected device will be the main device and be displayedon the screen.Individualizing You can individualize the devices that have become a group.Changing adevice name You can change the name of a device.Save Save the zone that a user has edited and the formation of devices.- A user can change the order of devices with drag & drop within a page.• When there are 2 or more zones, the zone list will be displayed with control & monitoring. When there is onezone, zone list will not be displayed with control & monitoring.NOTE8. Trouble historyff You can view the history of the errors with a device.9. DI patternff You can define rules that operate according to the DI signal.Pattern Description of control1 • There is no function.2• When DI-1 ON signal is input, emergency stop status will occur.• It will stop all indoor units and order the indoor units not to be controlled by a remote controller.• In the emergency stop status, you cannot use the user control command. In addition, the schedule control willnot work. When the contact control signal is changed to OFF, the control command can work normally. (DI-2will not be used with the pattern 2)3• When DI-1 ON signal is input, it will stop all indoor units. When OFF signal is input, all indoor units are ON.• When DI-2 ON signal is input, the remote control status of all the indoor units will be enabled and when theOFF signal is input, the remote control status will be disabled.4• It will operate when pulse signal is input to DI-1/2 as contact input.• When the pulse contact signal is input to DI-1, ON command will be sent to all indoor units.• When the pulse contact signal is input to DI-2, OFF command will be sent to all indoor units.Touch-con_IB_03944A_2_EN.indd 12 2013-10-07 오후 2:11:31

/ 16

Related manuals for Samsung MCM-A300N