|
ENG1615Connecting External ComponentsConnecting the FM AntennasFM Antenna (supplied)FM antenna connection1. Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal as a temporary measure.2. Slowly move the antenna wire around until you find a location where reception is good, thenfasten it to a wall or other rigid surface.• If reception is poor, connect an outdoor antenna.Before attaching a 75Ω coaxial cable (with a standard type connector), disconnect the supplied FMantenna.CONNECTIONSConnect Audio In on the DVD player to Audio Out on the external analog component.• Be sure to match connector colors.1Example: Analog signal components such as a VCR, Camcorder, and TV.Connecting an External Analog ComponentAudio CableIf the external analog componenthas only one Audio Out, connecteither left or right.Press AUX/PORT to select AUX 1.• ‘AUX 1’ appears in the display.2(not supplied) Connect the Digital Input(OPTICAL) on the Mini Component to the Digital Output of theexternal digital component.1Digital signal components such as a Cable Box/Satellite receiver(Set -Top Box).OPTICAL:Connecting an External Digital ComponentPress the AUX/PORT button to select DIGITAL IN.2Optical Cable(not supplied)Extermal Digital Component• This unit does not receive AM broadcasts.NoteAUX2 : Rear PanelAudio Cable (not supplied)If the external analogcomponent has onlyone Audio Out, connecteither left or right.1 Connect AUX IN 2 (Audio) on the MINI COMPONENTrear panel to the Audio Out of the external analogcomponent.■ Be sure to match connector colors.2 Press the AUX//PORT button to select input.The mode switches as follows : AUX 1 ➝ AUX 2.AUX2 : Connecting an External Analog ComponentAnalog signal components such as a VCR.1p~28p(DA75)-NO GB-4-03 2008.6.23 2:23 PM Page 18Downloaded From Disc-Player.com Samsung Manuals PreviousNext |