Samsung LN32D405E5D User Manual

Also see for 403 Series: User manual User manual User manual User manual User manual

15MEDIA.PPPOWERP.SIZESLEEP S.MODE P.MODEEnglish03 Basic FeaturesPicture OptionsO MENUm → Picture → Picture Options →ENTEREPicture OptionsColor Tone : Normal ►Size : 16:9Digital Noise Filter : AutoHDMI Black Level : NormalFilm Mode : OffU Move E Enter R Return■ Color Tone (Cool / Normal / Warm1 / Warm2)✎ Warm1 or Warm2 will be activated when thepicture mode is Movie.✎ Settings can be adjusted and stored for eachexternal device connected to an input on the TV.■ Size: Your cable box/satellite receivermay have its own set of screen sizes aswell. However, we highly recommendyou use 16:9 mode most of the time.16:9: Sets the picture to 16:9 widemode.Zoom1: Use for moderate magnification.Zoom2: Use for a stronger magnification.Wide Fit: Enlarges the aspect ratio of the picture to fitthe entire screen.4:3: Sets the picture to basic (4:3) mode.✎ Do not watch in 4:3 format for a long time. Tracesof borders displayed on the left, right and centerof the screen may cause image retention (screenburn) which are not covered by the warranty.Screen Fit: Displays the full image without any cut-offwhen HDMI (720p / 1080i / 1080p) or Component(1080i / 1080p) signals are input.✎ NOTEx After selecting Zoom1, Zoom2 or Wide Fit:1. Press the ► button to select Position.2. Press the ENTERE button.3. Press the ▲ or ▼ button to move the picture upor down.4. Press the ENTERE button.5. Press the ► button to select Reset.6. Press the ENTERE button to reset the pictureto its default position.x HD (High Definition): 16:9 - 1080i/1080p (1920x1080),720p (1280x720)x Settings can be adjusted and stored for eachexternal device you have connected to an input onthe TV.Input Source Picture SizeATV, AV,Component (480i, 480p)16:9, Zoom1,Zoom2, 4:3DTV(1080i),Component (1080i, 1080p),HDMI (720p, 1080i, 1080p)16:9, 4:3, Wide Fit,Screen Fit■ Digital Noise Filter (Off / Low / Medium / High /Auto): If the broadcast signal received by your TV isweak, you can activate the Digital Noise Filter featureto reduce any static and ghosting that may appear onthe screen.✎ When the signal is weak, try other options until thebest picture is displayed.■ HDMI Black Level (Low / Normal): Selects the blacklevel on the screen to adjust the screen depth.✎ Available only in HDMI mode (RGB signals).■ Film Mode (Off / Auto): Sets the TV to automaticallysense and process film signals from all sources andadjusts the picture for optimum quality.✎ Available in ATV, DTV(interlace), AV, COMPONENT(480i / 1080i) and HDMI (1080i).Picture Reset(Reset Picture Mode / Cancel)Resets your current picture mode to it's default settings.■ Reset Picture Mode: Returns all picture values in thecurrently selected mode to the default settings.