11Chapter 2. Device setupPartsThe colour and shape of parts may differ from what is shown.PowerPanel keySpeakerPanel keyPower on Press and hold for three seconds.Power off Press the panel key. A popup menu appears.Make sure Power Off is selected and then, press and holdthe panel key until the display turns off.Select source Press the panel key. A popup menu appears.Press the panel key again to select Source. Then, pressand hold the panel key to cycle through the desiredsource.• To use the panel key, make sure the sliding panel key is not protruding from thebottom of the product.Remote sensor and spacer logo (optional)Remote sensor2 m 50°Remote sensorPress a button on the remote control pointing at the remote sensor on the product toperform the corresponding function.• Using other display devices in the same space as the remote control of this productcan cause the other display devices to be inadvertently controlled.Use the remote control within 2 m from the sensor on the product at an angle of 50°from the left and right.The product’s screen also works as a remote sensor.When pointing the remote control at the screen, make sure:• the remote control is pointing towards the center of the screen.• to use the remote control 40 cm to 70 cm away from the screen.WARNINGStore used batteries out of reach of children and recycle.