Samsung IFH Series User Manual

Also see for IF015H: User manual User manual User manual Quick reference guide User manual

46Video Wall→ Video Wall → EVideo Wall– The displayed image may differ depending on the model.– For the supported resolutions, refer to the S-Box Group Supported items in theStandard Signal Modes table on page 93.Customize the layout of multiple S-boxes that are connected to form a LED display.In addition, display part of a whole picture or repeat the same picture on each of the connected multiple S-boxes.To display multiple images, refer to MDC Help or the MagicInfo user guide. Some models may not support theMagicInfo function.Video WallYou can activate or deactivate Video Wall.When using multiple S-Boxes, you can set Video Wall to On to synchronize and display the S-Box outputs as a singlecontent.• Off / OnHorizontal x VerticalThis feature automatically splits a display based on a videowall matrix configuration.Enter the videowall matrix.The display is split based on the configured matrix. The number of vertical or horizontal S-boxes can be set withinthe range of 1 to 15.― A display can be split into a maximum of 100 screens.― The Horizontal x Vertical option is only enabled when Video Wall is set to On.Screen PositionTo rearrange split screens, adjust the number for each product in the matrix using the Screen Position feature.Selecting Screen Position will display the videowall matrix with the numbers assigned to the products that formthe videowall.To rearrange products, use the direction buttons on the remote control to move a product to another desirednumber. Press the E button.― Screen Position allows you to split the screen into a maximum of 100 views (15x15). The maximum number ofviews that can be split when products are connected via DP Loopout is also 100.― The Screen Position option is only enabled when Video Wall is set to On.― To use the function, make sure Horizontal x Vertical is configured.