Samsung HW-Q630A Full Manual

ENG - 15Method 2. Connecting WirelesslyConnecting a TV via BluetoothWhen a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.• Only one TV can be connected at a time.SOUNDMODEPAIRORThe initial connection1. Press the PAIR button on the remote control to enter the “BT PAIRING” mode.(OR) a. Press the (Source) button on the top panel and then select “BT”.“BT” changes to “BT PAIRING” in a few seconds automatically or changes to “BT READY” ifthere is a connect record.b. When “BT READY” appears, press and hold the (Source) button on the top panel of theSoundbar for more than 5 seconds to display “BT PAIRING”.2. Select Bluetooth mode on the TV. (For more information, see the TV’s manual.)3. Select “[AV] Samsung Soundbar Q6A-Series” from the list on TV’s screen.An available Soundbar is indicated with “Need Pairing” or “Paired” on the TV’s Bluetooth devicelist. To connect the TV to the Soundbar, select the message, and then establish a connection.• When the TV is connected, [TV Name] → “BT” appears on the Soundbar’s front display.4. You can now hear TV sound from the Soundbar.If the device fails to connect• If a previously connected Soundbar listing (e.g. “[AV] Samsung Soundbar Q6A-Series”) appears inthe list, delete it.• Then repeat steps 1 through 3.NOTE• After you have connected the Soundbar to your TV the first time, use the “BT READY” mode toreconnect.