Menu
Samsung HT-X625 User Manual
                                                                 |
4System setupSETTING THE SPEAKEr MODESignal outputs and frequency responses from the speakers will automatically be adjusted according toyour speaker configuration and whether certain speakers are used or not.In Stop mode, press the MENU button.Press the Cursor % button to move to Audio and then press theENTEr or + button.In the SPEAKEr SETUP, press the ENTEr or + button again.Press the Cursor $, %, _, + button to move to the desired speakerand then press the ENTEr button.For C, SL, and SR, each time the button is pressed, the modeswitches alternately as follows : SMALL NONE.For L and R, the mode is set to SMALL.SMALL : Select this when using the speakers.NONE : Select this when no speaker is connected.d Press the rETUrN button to return to the previous level.d Press the EXIT button to exit the setup screen.The speaker mode may vary, depending on PRO LOGIC and STEREO settings (see page 54).SETTING THE DELAY TIMEIf the speakers cannot be placed at equal distances from the listening position, you can adjust the delaytime of the audio signals from the Centre and rear speakers.In Stop mode, press the MENU button.Press the Cursor % button to move to Audio and then press theENTEr or + button.Press the Cursor % button to move to DELAY TIME and then pressthe ENTEr or + button.Press the ENTEr button.Press the Cursor _, + button to set the Delay time.You can set the delay time for C between 00 and 05mSEC and forSL and SR between 00 and 15mSEC.d Press the rETUrN button to return to the previous level.d Press the EXIT button to exit the setup screen.1...4.~~~~M `1...4..~MOVE ENTEr EXITrETUrNMOVE CHANGE EXITrETUrN |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved