40 - EnglishPlaying Content✎ In Bluetooth connection mode, the Bluetoothconnection will be lost if the distance between theHome Cinema System and the Bluetooth deviceexceeds 10 meters. When the Bluetooth devicecomes back into effective range or you restart theBluetooth device, you will have to pair the deviceand home cinema again to reconnect.✎ In Bluetooth mode, the screen saver will start ifthe Bluetooth device stays in the Ready state for5 minutes. To reconnect the Bluetooth device,turn off the screen saver, and then connect thedevice. To turn off the screen saver, press anybutton on the remote control (the Volume button,an 78:; buttons, etc.).Using the Bluetooth Quick startWhen the home cinema is turned off, connecting apreviously connected smart device to the product via aBluetooth connection can turn the home cinema on.✎ The home cinema must be plugged in for Quickstart to work.✎ To use this function, set Settings > System >Quick start to On.✎ To use this function, the Bluetooth connectionbetween the home cinema and your smart deviceshould have been established before. In otherwords, the home cinema should be found on thelist of Bluetooth devices your smart device hasalready connected to.1. Connect your previously connected smart deviceto the product via Bluetooth. (For informationon Bluetooth connections, refer to your smartdevice’s manual.)2. Once connected, the home cinema turns itselfon automatically in BT mode.~ Select the desired music to play on your smartdevice.Playing Photo ContentYou can play photo content located on a DVD, USB,mobile device, or PC.Using the Tools MenuWhile displaying a photo, press the TOOLS button onthe remote.Select Settings(T) in the upper right corner of thescreen, and then press the OK button. The Toolsmenu drop down list appears.Slideshow Settings Speed : Select to set a slide show's speed. Effects : Select to set a slide show's specialeffects.RotateSelect to rotate the picture. (This will rotate thepicture either clockwise or counter clockwise.)ZoomSelect to enlarge the current picture. (Enlarge up to4 times)Picture Mode Dynamic : Choose to increase sharpness. Standard : Choose for most viewingapplications. Movie : This is the best setting for watchingmovies. User : Lets you adjust the sharpness and noisereduction function respectively.Background MusicSelect to listen to music while viewing a slide show.Equaliser ModeSet to On to use the equaliser. Customize yourown personal sound preferences using theequaliser settings.Equaliser SettingsThis function is only available when EqualiserMode is On.