Samsung HT-J7500W User Manual

Also see for HT-J7500W: User manual User manual User manual

51 - EnglishAppendixAdditional InformationNotesConnectionsHdMI OUT● Certain HDMI output resolutions may not work,depending on your TV.● You must have an HDMI connection to enjoyvideos with 3D technology.● A long HDMI cable may cause screen noise. Ifthis occurs, set HdMI deep Colour to Off in themenu.Settings3d Settings● For some 3D discs, to stop a movie during 3Dplayback, press the e (ExIT) button once. Themovie stops and the 3D mode option is de-activated.To change a 3D option selection when you areplaying a 3D movie, press the e (ExIT) buttononce. The Blu-ray menu appears. Press the e(ExIT) button again, then select 3d Settings inthe Blu-ray menu.● Depending on the content and the positionof the picture on your TV screen, you may seevertical black bars on the left side, right side, orboth sides.Tv Aspect Ratio● Depending on the disc type, some aspect ratiosmay not be available.● If you select an aspect ratio and option which isdifferent than the aspect ratio of your TV screen,the picture might appear to be distorted.● If you select 16:9 Original, your TV may display4:3 pillarbox (black bars on the sides of thepicture).Bd Wise (Samsung products only)● When Bd Wise is On, the Resolution settingautomatically defaults to Bd Wise and Bd Wiseappears in the Resolution menu.● If the product is connected to a device that doesnot support Bd Wise, you cannot use the BdWise function.● For proper operation of Bd Wise, set the BdWise option in both the product and the TV toOn.digital Output● Be sure to select the correct digital Output oryou will hear no sound or just loud noise.● If the HDMI device (AV receiver, TV) is notcompatible with compressed formats (DolbyDigital, DTS), the audio signal outputs as PCM.● Regular DVDs do not have BONUSVIEW audioand Navigation Sound Effects.● Some Blu-ray Discs do not have BONUSVIEWaudio and Navigation Sound Effects.● This digital Output setup does not affect theanalogue (L/R) audio or HDMI audio output toyour TV.It affects the optical and HDMI audio outputwhen your product is connected to an AVreceiver.● If you play MPEG audio soundtracks, the audiosignal outputs as PCM regardless of your digitalOutput selections (PCM or Bitstream).● digital Output can be activated when SoundOutput is set to Tv Speaker.Bd-Live Internet Connection● The Internet connection may be restricted whileyou are using BD-LIVE contents.Anynet+ (HdMI-CEC)● Depending on your TV, certain HDMI outputresolutions may not work. Please refer to theuser manual of your TV.● This function is not available if the HDMI cabledoes not support CEC.● If your Samsung TV has an Anynet+ logo, then itsupports the Anynet+ function.Bd data Management● In the external memory mode, disc playback maybe stopped if you disconnect the USB device inthe middle of playback.● Only those USB devices formatted in the FAT filesystem (DOS 8.3 volume label) are supported.We recommend you use USB devices thatsupport the USB 2.0 protocol with 4 MB/sec orfaster read/write speeds.● The Resume Play function may not work afteryou format the storage device.● The total memory available to Bd dataManagement may differ, depending onconditions.divx® video On demand● For more information about DivX(R) VOD, visit“http://vod.divx.com”.Appendix