Menu
Samsung HT-H4500K User Manual
Also see for HT-H4500K: User manual
                                                                                                                                        |
10 - EnglishConnectionsInstalling the Speakers on the Half Tallboy Stand* HT-H4530HK only - Front Speakers1. Stretch out the speaker cables as shown and arrange itthrough the hole of the stand base .2. When done, use the stand driver to tighten the standnut as shown.3. This is the appearance after the speaker is installed.Follow these steps to install another speaker.4. If you want to adjust the height of the speaker, loosentwo screws on the rear of the speaker.5. Pull up the speaker in the arrow direction. Fit thespeaker in a height adjusting hole of your choice.| CAUTION | Be careful as an excessive force may result in a physicaldamage.6. Insert two screws clockwise into the hole on the rear ofthe speaker using a screwdriver as shown and tightenback 2 screws.7. This is after the height of the speaker is adjusted. Youcan repeat these steps above at any time if you want toreadjust the height.Installing the Speakers on the Tallboy Stand* HT-H4530K only - Front Speakers* HT-H4550K only - Front/Surround Speakers1. Turn the Stand Base upside-down and connect itto the Stand.2. Use the driver to combine the screws on the 3marked holes.1 Stand BaseStand2215 6743HT-H4500K_30HK_30K_50K_ZN-ENG-0508.indd 10HT-H4500K_30HK_30K_50K_ZN-ENG-0508.indd 10 2014-05-08 11:35:152014-05-08 11:35:15 |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved