Menu
Samsung HT-F450BK User Manual
                              |
English 17 |04 Settings If you want to change the resolution in BD Wise mode,you must set BD wise mode to Off in advance. BD Wise will be disabled if the product is connectedto a device that does not support BD Wise.ResolutionSets the output resolution of the HDMI video signal.The i and p indicate interlace and progressive scan,respectively.• 576p(480p), 720p, 1080i, 1080p, BD Wise| NOTE | The BD Wise menu item appears only if BD Wise isset to On. Depending on your TV, certain HDMI outputresolutions may not work. Please refer to the user’smanual of your TV. If Composite is connected, the resolution supportsonly 576i(480i). 1080P may not appear depending on TV.HDMI FormatLets you set the colour space format for the HDMI outputto match the capabilities of the connected device (TV,monitor).Video Out Signal(option)Different countries apply different TV standard.You can select from NTSC or PAL.AudioSimple SetupIt is the Function for selecting the Speaker Layoutsuitable with the layout type of the connected Speaker.That is two path to select:1. Settings AudioSimple Setup2. Settings SystemInitial Settings Selectthe desired languageSimple Speaker Setup• Normal Mode: Use this option when the surroundspeakers are located behind you.• Simple Mode: Use this option if the surround speakersare located in front of you. If Simple Mode is selected, Speaker Setting cann't beset.Speaker SettingSpeaker SizeYou can set the Speaker Size of the Center and SurroundSpeakers, as well as Test Tone in this mode.Sound EditYou can adjust the balance and level for each speaker.Press the ▲▼ buttons to select and adjust the desiredspeaker.Press the ◄► buttons to adjust the settings.Delay TimeIf the speakers cannot be placed at equal distances fromthe listening position, you can adjust the delay time of theaudio signals from the Center and Surround speakers.You can also set the Test Tone in this mode.| NOTE | The Delay Time menu will be activated only when a5.1 channel source is played. You can not set Center and Surround in this modewhen their Speaker Size is set to NONE. With AC-3, the delay time of surround can be setbetween 00 and 15mSEC.Center only can be setbetween 00 and 5mSEC. The Center channel is only adjustable on 5.1 channeldiscs.Test ToneUse the Test Tone feature to check the speakerconnections.• Press the ◄► buttons to select On.• The test tone will be sent to Front Left Center Front Right Surround Right Surround Left Subwoofer in order.To stop the test tone, press the E button.DRC (Dynamic Range Compression)This feature balances the range between the loudest andquietest sounds. You can use this function to enjoy DolbyDigital sound when watching movies at low volume atnight.AUDIO SYNCVideo and audio sync may not match with digital TV. Ifthis occurs, adjust the audio delay time to match thevideo.Speaker Selection• Video is transmitted over the HDMI connection cableonly, and audio is output through the product speakersonly. Select the Home Theater.• Both video and audio signals are transmitted over theHDMI connection cable, and audio is output throughyour TV speakers only. Select the TV Speaker. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved