Samsung HT-DM550 Instruction Manual

Also see for HT-DM550: Manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

Connecting your System to the Power Supply13Controlling a TV with the RemoteYou can use the remote control to operate other manufactures’ TV.1 Turn on the TV.2 Point the DVD’s remote at the TV.• Manufacturers’ codes are subject to change without notice. If they are changed, thisremote control cannot operate the equipment.4 If the TV turns off, setup is complete.• Now, you can perform the following operations on the TV.3 While holding the button down, enter thecode for your brand.TVexample : For SAMSUNG 1TVsWhile holding down the button,enter .TVManufacturer01~06,32121209,17,2111,13,14,243202,3002,16292313,14,2408,23~2702,20,2213,14,22~2412,160210,3115,1614,24,2813,14,24,33,3407,16~19,21SamsungAkaiFIisherGrundigHitachiJVCLGMitsubishiMivalNokiaNordmendePanasonicPhilipsSabaSanyoSchneiderSharpSonyTelefunkenThomsonToshibaCODES• If there is more than one code listed in the table,enter one at a time to determine which code works.TV : Turn on or off the TV.VOLUME +/– : Adjust the volume.TV/VIDEO : Set the input mode (either TV or VIDEO)CHANNEL +/– : Change the channels.The main lead must be plugged into an appropriate socket.Before plugging your system into a main socket, you must check the voltage.Check the position of the voltage selector on the rear of the system (OPTIONAL).1. Plug the main lead (marked AC Cord on the rear of the system) into an appropriate socket.2. Press the On/Standby button to switch your DVD Player system on.