22 EnglishConnectionsConnecting the Video Out to your TVChoose one of the three methods for connecting to a TV.WIRELESSFM ANTHDMI OUTAUX IN 2 COMPONENTOUTVIDEOOUT FM ANTAUX IN 2METHOD 1 : HDMIConnect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI INjack on your TV.METHOD 2 : Component VideoIf your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from theCOMPONENT OUT (Pr, Pb and Y) jacks on the back of the product to the Component Video Input jacks on your TV.METHOD 3 : Composite VideoConnect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN jack on your TV.NOTEResolutions available for the HDMI output are 480p(576p), 720p,1080i/1080p. See page 27 for the resolutionsetting.This product operates in Interlace scan mode 480i(576i) for component/composite output.After making the video connection, set the Video input source on your TV to match the corresponding Videooutput mode on your product.Turn this product on first before you set the video input source on your TV. See your TV owner's manual formore information on how to select the TV's Video Input source.CAUTIONDo not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyrightprotection systems and the picture will be distorted on the television.✎!METHOD 1METHOD 3 (supplied)METHOD 2HT-C550-XSA_ENG-0210.indd 22HT-C550-XSA_ENG-0210.indd 22 2010-02-10 2:23:342010-02-10 2:23:34