English 2903 SetupIdeal CenterSpeaker placementDf: The distance from Front SpeakerDc: The distance from Center SpeakerDr: The distance from Rear SpeakerIt is desirable to place all speakers within this circle.Ideal RearSpeaker placementSetting the Center SpeakerIf the distance of Dc is equal to or longer than thedistance of Df in the figure, set the mode as 0ms.Otherwise, change the setting according to the table.DistancebetweenDf and Dc0.00ft 1.12ft 2.23ft 3.48ft 4.59ft 5.77ftDelayTime 00 ms 01 ms 02 ms 03 ms 04 ms 05 msSetting the Rear SpeakerIf the distance of Dc is equal to or longer than thedistance of Dr in the figure, set the mode as 0ms.Otherwise, change the setting according to the table.DistancebetweenDr and Dc0.00ft 3.48ft 6.92ft 10.37ft 11.88ft 17.36ftDelayTime 00 ms 03 ms 06 ms 09 ms 12 ms 15 msNOTEWith PL II (Dolby Pro Logic II), the delay timemay be different for each mode.With AC-3 and DTS, the delay time can be setbetween 00 and 15mSEC.The Center channel is only adjustable on 5.1channel discs.✎Test ToneSettingsMove Select ReturnSpeaker SettingSpeaker SizeSound EditDelay TimeTest Tone : On ►Select ReturnUse the Test Tone feature to check the speakerconnections.Press the ◄► buttons to select ON.The test tone will be sent to Front Left ➞ Center➞ Front Right ➞ Rear Right ➞ Rear Left ➞Subwoofer in order.To stop the test tone, press the ENTER button.ASC (Auto Sound Calibration) SettingBy setting the Auto Sound Calibration(ASC) functionjust once when you relocate or install the product,you can have the product automatically recognizethe distance between speakers, levels betweenchannels, and frequency characteristics to create a5.1-channel sound field optimized for yourenvironment.AUX IN 1/ASC INAUX IN 1/ASC INASCMicrophoneL: Front Speaker (L)R: Front Speaker (R)C: Center SpeakerSW: SubwooferSL: Rear Speaker (L)SR: Rear Speaker (R)••