Ideal Center Test Tone! [\ i.:._: "_w,,, IdealRearL ."._.,,_._ ."._Z4----SpeakerplacementPlaceall speakersw_n_n_n_sarc_e.Dr:Thedistancefron-:rent SpeaKerDc ThedistanceTromCenterSpeaKerDr:The distancefrom RearSpeakerSetting the Center SpeakerIf the distance of Dc is equal to or longer than thedistance of Df inthe figure, set the mode as 0ms.Otherwise, change the setting according to the table_i_tan_ 0.00ft]l.12ft 2.23ft 3.48ft 4.59ff 5.77ft00ms]01ms 02 ms 03 ms 04 ms 05 msSetting the Rear SpeakerIf the distanceof Dc is equal to or longerthan thedistanceof Dr inthe figure,set the mode as0ms,Otherwise,change the settingaccordingto the table,o.ooft ]3.48ft 6.92ft 10.37ft11.88ft 17.36f00ms]03ms 06 ms 09 ms 12 ms 15 msNOTE_ With DL'qPL II(Dolby Pro Logic II),the delay timemay be differentfor each mode,_ With AC-3 and DTS, the delay time can be setbetween 00 and 15mSEO._ The Center channel is only adjustable on 5.1channeldiscs.Use the Test Tone feature to check the speakerconnections.• Press the 4 _ buttons to select On.• The test tone will be sent to Front Left _ CenterFront Right -_ Rear Right -* Rear Left -*Subwoofer in order,To stop the test tone, press the ENTER button.ASC (Auto Sound Calibration) Setting ..........By setting the Auto Sound Calibration(ASC) functionjust once when you relocate or install the product,you can have the product automatically recognizethe distance between speakers, levels betweenchannels, and frequency characteristics to create a5.1-channel sound field optimized for yourenvironment,L: FrontSpeaker(L)R: FrontSpeaker(R)C: CenterSpeaker/SW: SubwooferSL: RearSpeaker(L)SR: RearSpeaker(R)English 29