Samsung HT-C550 User Manual

Also see for HT-C550: User manual User manual User manual Firmware update User manual

English 1702 ConnectionsInstalling the Speakers on the Tallboy Stand* HT-C553 only - Front Speakers* HT-C555 only - Front/Rear SpeakersTurn the Stand Base upside-down and connect it tothe Stand.Insert small screws (4*20, For connecting Stand & StandBase) clockwise into the four holes marked using ascrewdriver as shown in the illustration.CAUTION : When you use a torque screwdriver, becareful not to put excessive force. Otherwise, it runsidle or can be damaged. (torque screwdriver- below 15kg.f.cm)Connect the upper Speaker to the assembled Stand.Insert another large screw (5*15, For connecting Speaker& Stand) clockwise into the hole on the rear of thespeaker using a screwdriver.This is the appearance after the speaker is installed.Follow this steps to install other speaker.1.2.!3.4.5.In case of HT-C550iPodDIGITALAUDIO INOPTICALFront Speaker (R)SubwooferRear Speaker (R) Rear Speaker (L)Front Speaker (L)Centre Speaker* Refer to page 16 for the speakers of HT-C553/C555.Connecting The SpeakersPress down the terminal tab on the back of the speaker.Insert the black wire into the black terminal (–) and the red wire into the redterminal (+), and then release the tab.Connect the connecting plugs to the back of the product by matching thecolours of the speaker plugs to the speaker jacks.1.2.3. Black Red1 23 4StandStandBaseStandSpeaker5HT-C550-ELS_ENG-0607.indd 17HT-C550-ELS_ENG-0607.indd 17 2010-06-07 10:55:002010-06-07 10:55:00