English - 61Setting up the TV with your PCHow to Auto AdjustUse the Auto Adjust function to have the TV set automatically adjust the video signals it receives from the PC.The function also automatically fine-tunes the settings and adjusts the frequency values and positions.➢ Change to the PC mode first.1 Press the MENU button.Press the ◄ or ► button to select Setup, then press the ENTER button.Press the ▲ or ▼ button to select PC, then press the ENTER button.2 Press the ▲ or ▼ button to select Auto Adjustment, then press the ENTER button.The message Auto Adjustment in progress. Please wait. appears on the screen and thepicture adjustments are automatically activated.Adjusting the Screen QualityThe purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuningalone, then do the frequency adjustments to the utmost and fine tune again. After the noise has been reduced, re-adjust thepicture so that it is aligned on the center of the screen.➢ Change to the PC mode first.3 Press the ▲ or ▼ button to select Image Lock, then press the ENTER button.4 Press the ▲ or ▼ button to select Coarse or Fine, then press the ENTER button.Press the ◄ or ► button to adjust the screen quality, then press the ENTER button.➢ This feature may change the width of the image. If necessary, adjust the position tocenter.5 Select Return by pressing the ▲ or ▼ button, then press the ENTER button to return to theprevious menu.Continued...SetupEnterPCImage LockPositionAuto AdjustmentImage ResetResolution 1152x864 @60HzReturnAuto Adjustment in progress.Please Wait.SetupEnterPCImage Lock ►PositionAuto AdjustmentImage ResetResolution 1152x864 @60HzReturnSetupImage LockCoarse 50Fine 31ReturnEnterAdjustSetupEnterBlue ScreenMelodyColor WeaknessPC ►Home Theater PCLight EffectHDMI Black LevelFilm ModeFunction HelpSW UpgradeSetupOffOffIn WatchingNormalMediumOffOn
