Samsung Galaxy Amp prime User Manual

Also see for 2016 Galaxy J3: Service guide Quick start guide

Contents

5 Assemble Your DeviceGetting StartedInstall a Memory CardYou can install an optional microSD™ ormicroSDHC™ memory card (not included) to addmore memory space to your device.Note: A memory card can be installed at any time.It is not necessary to install it prior to using the device.Note: The micro SD card slot is located above theSIM card slot.1. Remove the back cover. For more information,see Remove the Back Cover.2. Slide the memory card into the slot with the goldcontacts facing down.3. Replace the back cover. For more information,see Replace the Back Cover.Install the Battery1. Insert the battery into the opening on the back ofthe device, making sure the connectors align.2. Gently press down to secure the battery.Replace the Back Cover1. Place the back cover onto the back of the deviceand press down.2. Press along the edge of the back cover until youhave a secure seal.Charge the BatteryYour device is powered by a rechargeable, standardLi-Ion battery. A USB charger (charging head andUSB cable) is included with the device for chargingthe battery from any standard outlet.The battery comes partially charged. A fullydischarged battery requires up to four hours ofcharge time. You can use the device while charging.Note: It is recommended you fully charge the batterybefore using your device for the first time.Caution: Use only charging devices and batteriesapproved by Samsung™. Samsung accessories aredesigned for your device to maximize battery life.Using other accessories may invalidate your warrantyand may cause damage.