| 
1. In the menu of , select Security Menu (<5GHz-Security> or <2.4GHz-Security>) toconfigure wireless networks’ security settings.2. Select one of the following Network Authentication:A. Open : allows access to the wireless network without security key.B. WPA2 : uses an authentication server to generate keys or certificates.C. WPA2-PSK : use Pre-Shared key(PSK) for encryption.D. Mixed WPA2/WPA : combination Wi-Fi Protected Access version 2 and Wi-Fi ProtectedAccess with using an authentication server to generate keys or certificates.E. Mixed WPA2/WPA-PSK : combination Wi-Fi Protected Access version 2 with Pre-Shared Keyand Wi-Fi Protected Access with Pre-Shared Key.3. WPA/WAPI passphrase : Enter wireless network’s password.4. WPA/WAPI Encryption :A. AES (Advanced Encryption Standard) : enhanced encryption type to WPA2 over WPA.B. TKIP+AES(Temporal Key Integrity Protocol and Advanced Encryption Standard) : TKIP andAES encryption types are capable to access wireless network.5. Protected Management Frame : Select “Capable or Required” to protect management framessuch as authentication, de-authentication, association, dissociation.6. Click button to apply and save the changed configuration.Configuration Wireless Network Security – WPS (WiFi Protected Setup) Setup1. In the menu of , select Security Menu (<5GHz-Security> or <2.4GHz-Security>) toconfigure wireless networks’ WPS setup.2. Select “Enabled” to Enable WPS.A. For WPS-PIN configuration, choose “Use STA PIN” radio button and enter Client’s PINnumber. Press “Add Enrollee” button and start Client’s WPS PIN. |
