Samsung GN642FFXD Installation And User Manual

Also see for GN641FFBD: Installation and user manual

18Technical instructions■ This appliance must be installed by a qualified technician or installer.■ Prior to installation, ensure that the local distribution conditions(nature of the gas and gas pressure) and the adjustment of theappliance are compatible.■ The adjustment conditions for this appliance are stated on the label(or data plate).■ This appliance is not connected to a combustion products evacuationdevice. It shall be installed and connected in accordance with currentinstallation regulations. Particular attention shall be given to therelevant requirements regarding ventilaton.■ Before installing, turn off the gas and electricity supply to theappliance.■ All appliances containing any electrical components must be earthed.■ Ensure that the gas pipe and electrical cable are installed in such away that they do not touch any parts of the appliacne which becomehot.■ Gas pipe or connector shouldn’t be bent or blocked by any otherappliances.■ Check the dimensions of the appliance as well as the dimensions ofthe gap to be cut in the kitchen unit.■ The panels located above the work surface, directly next to theappliance, must be made of non-flammable material. Both the strati-fied surfacing and the glue used to secure it should be heat resistant,to prevent deterioration.■ Turn on appliance tap and light each burners.Check for a clear blue flame without yellow tipping.If burners shows any abnormalties check the following :- Burner lid on correctly- Flame spreader positioned correctly- Burner vertically aligned with injector nipple■ A full operational test and a test for possible leakages must be carriedout by the fitter after installaion.■ The flexible tube shall be fitted in such a way that it cannot come intocontact with a moveable part of the housing unit and does not passthrough any space susceptible of becoming congested.