Samsung GH68-11254A Quick Start Manual

Guide No.: GH68-11254A09/2006. Rev. 1.21 Set your Bluetooth phone to discover theheadset by following your phone's guide.Typically, the steps involve going to the Settings,Connection, or Bluetooth menu on yourphone and then selecting the option to discoverBluetooth devices.Your phone will find the Samsung WEP200headset.2 Select Samsung WEP200.3 When the phone asks if you want to pair with it,confirm by selecting Yes or OK.4 Enter the headset passkey or PIN, 0000.Quick Start GuideBluetooth Mono HeadsetWEP200Thank you for purchasing the Samsung BluetoothMono Headset WEP200, we hope you will bedelighted with its operation.Take a moment before you get started tofamiliarize yourself with your new headset.Make sure you have the following items with yourheadset:Make sure you have the following items with yourheadset:Charging case, Travel adapter, Manual,2 headset hooksCharging case, Travel adapter, Manual,2 headset hooksCharging case, Manual, 2 headset hooksFor Set 2, use your phone charger as apower source for recharging.Charging case, Manual, 2 headset hooksFor Set 2, use your phone charger as apower source for recharging.Check the accessoriesCheck the accessories Charge your headsetCharge your headsetCharge the headset's battery fully before usingthe headset for the first time.1 Put the headset in the supplied charging caseand close the cover.2 Plug the travel adapter into the case'scharging socket.3 Plug the travel adapter into the electricaloutlet.4 Remove the travel adapter from the case.• For Set 1, use the travel adapter provided.• Charge the headset until the red light on theheadset turns to blue.• The headset will be fully charged inapproximately 2 hours.Before you can use your headset, you must pair itwith your phone.The indicator light flashes in blue as you press andhold the Multi-Function button. Continue holdingdown the button until the blue light is steadily lit.Put your headset inpairing modeTurn on Bluetooth on yourphone and pair with headset Your phone and headset are now paired andready to make and receive calls. To confirmthey are operating properly, make a call:1 Place the headset over your ear.See Wearing the headset on the reverseside of this guide.2 On your phone, make a call to the numberyou want.3 If your phone and headset are successfullypaired, you will hear ringing on the headset.After you have successfully paired your phoneand headset, you do not need to repeat theseinitial setup steps each time you use theheadset.Test and useUsing your WEP200See Features and Functions Guideon the reverse side of this guidefor information on using yourWEP200.1 Ensure that the headset is off (see Turnheadset on/off on the reverse side of this guide).2 Press and hold the Multi-Function button untilthe indicator light turns on in blue(approximately 8 seconds).Before using your headsetMulti-Function buttonHookVolume controlbuttonsIndicator lightMicrophoneCharging contactNOTE:The headset cannot be used while charging.NOTE:Your headset supports the headset and/or hands-freeprofile(s).Set 1:Set 2:Start hereCharge your headsetPut your headset in pairing modeTurn on Bluetooth on your phone andpair with headsetTest and useGet connected in 4 quick stepsHeadquarters:1301 East Lookout Drive Suite 150Richardson, TX 75082Internet Address:http://www.samsungmobileusa.com/accessoriesCustomer Care Center:1-888-987-4357

/ 2

Related manuals for Samsung GH68-11254A