Samsung EzVIEW SEW-3022 User Manual

Contents

English · installation02How to InstallCaution if you use the system to watch a young child, do not place the camera where thechild can reach.WirelessreceiverPlace the receiver in a place that will have clear reception with your camera(s).Pull out the stand.Do not pull up the stand lever with an excessive force. Otherwise, it may be broken.WirelessCameraBefore you install the camera, carefully plan where and how it will be positioned, andwhere you will route the cable that connects the camera to the power adapter.Before starting permanent installation, verify its performance by observing the imageon the receiver when camera is positioned in the same location/position where it willbe permanently installed and the receiver is placed in the location where it will be usedmost of the time.installationWarningsAim the camera(s) to best optimize the viewing area: Select a location for the camerathat provides a clear view of the area you want to monitor, which is free from dust, andis not in line-of-sight to a strong light source or direct sunlight.Avoid installing the camera where there are thick walls or obstructions between thecamera and the receiver.STRANGULATION HAZARD - Keep cord out of child's reach. NEVER place camera orcords within 3 feet of crib or playpen. Use enclosed wire clips to help secure cordaway from child's reach. Never use extension cords with AC Adapters. Only use theAC Adaptors provided.1.2.n `Carefullyunpackthecamera.If you are installing cameras that did not come with the system, please see thepairing camera section of this manual for details on installation.Mountthecameratothewall.Mark the position of the screw holes on the wall,and drill holes and insert 2 screws, then firmlyattach the camera to the wall by placing thestand over the installed screws and pushing thebase downwards.The camera can also be placed on a flat surface,such as a table or shelf, and no mountinghardware is required.AdjusttheviewingangleofthecameraYou can install additional cameras (maximum of 4 cameras).When adding cameras that were not included in the original box, you will need to pair upthe cameras with the receiver.For paring to add a camera, refer to “Pairing”. (Page 12)1.2.n `3.n `inStallationSEW-3022-ENGLISH.indd 9 2011-04-12 오후 2:52:13