Samsung EI-AN920 User Manual

Also see for EI-AN920: User manual User manual

Contents

Getting started6Charging the batteryCharge the battery before using the tracker for the first time or when the tracker has beenunused for extended periods.Use only Samsung-approved chargers and cables. Unapproved chargers or cables cancause the battery to explode or damage the tracker.If the battery is completely discharged, the tracker cannot be turned on immediatelywhen the charger is connected. Allow a depleted battery to charge for a few minutesbefore turning on the tracker.1 Connect the tracker to the charging dock by aligning the charging contacts of the twodevices.2 Connect the charging dock to the USB power adaptor via the USB cable. Plug the USBpower adaptor into an electric socket.While charging, the notification light will flash red. When it is fully charged, thenotification light will flash green.